NEC DLP Cinema NC3541L Installation Manual page 82

Silent Mode
Sets whether the rear (SYSTEM/LIGHT) status indicator, buzzer, indicators on the projector's control panel, illumination, and
LCD screen backlight are enabled or disabled.
Rear LED
Buzzer
Control Button
Remote Sensor
This option determines which remote sensor on the projector is enabled in wireless mode.
Enable(All)
Disable(All)
Front Only
Rear Only
If the remote control system does not function when direct sunlight or strong illumination strikes the remote control
NOTE
sensor of the projector, change another option.
← Selects the item.
← Displays the currently selected item with asterisk (*).
← Displays the setting.
Sets whether to use or not use the rear (SYSTEM/LIGHT) status indicator.
Enable: Use
Disable: Not use (the rear (SYSTEM/LIGHT) status indicator does not light up)
Sets whether to use or not use the buzzer.
Enable: Use
Disable: Not use (the buzzer does not sound)
Sets whether to use or not use the indicators on the projector's control panel.
Enable: Use
Disable: Not use (the LED next to the buttons do not light up)
← Selects the item.
← Displays the setting.
Enable remote control receiver on the front and rear.
Disable remote control receiver on the front and rear.
Enable remote control receiver on the front.
Disable remote control receiver on the front.
LCD Menu
107