Before Operation; Audio Adjustments - Aiwa CX-NMT90 Operating Instructions Manual

BEFORE OPERATION AUDIO ADJUSTMENTS
POWER
TAPE
DEMO
CD
To turn the unit on
Press one of the function buttons (TAPE, TUNER, VIDEO/AUX,
CD, MD).
Playback of the inserted disc or tape begins, or the previously
tuned station is received (Direct Play Function).
The POWER button is also available.
When the unit is turned on, the disc compartment may open and
close to reset the unit.
DEMO (Demonstration) mode
When the AC cord is connected, the display window
demonstrates the functions of the unit. When the power is turned
on, the DEMO display is overridden by the operation display.
When the power is turned off, the DEMO mode is restored.
To cancel DEMO mode
Press the DEMO button. The clock display appears. (To set
the current time, see "SETTING THE CLOCK on page 21.)
Tore-activate the DEMO mode, press the DEMO button again.
illumination guides
Whenever the AC cord is connected or one of the function buttons
is pressed, the buttons for that operation light up or flash.
Example: When the AC cord is connected, the II SET button
flashes as a guide to setting the current time.
Flash windows
The windows on the top of the unit and the cassette decks light
up or flash while the unit is being powered on.
To turn off the light of the top window, press the button while
pressing the CD button. To turn back on, repeat the above.
To turn off the light of the cassette decks, press the button
while pressing the TAPE button. To turn back on, repeat the
above.
To turn the unit off
Press the POWER button.
VOLUME
Turn the VOLUME control on the main unit, or press the
VOLUME buttons on the remote control.
The volume level is displayed as a number from O to MAX 1[31).
The volume level is automatically set to 16 when the power is
turned off with the volume level set to 17 or more.
To change the Iefth'ight balance
Press the MANUAL SELECT button on the remote control. L/R
is displayed for 2 seconds. Press the 1<< DOWN or >*II UP
button on the remote control within these 2 seconds.
The DOLBY PRO LOGIC front speakers level is also changed.
(See page 17)
BBE SYSTEM
The BBE system enhances the clarity of high-frequency sound.
It also enriches the Karaoke function to make your voice sound
clear and pleasant.
Press the BBE button.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of Iow-frequsncy
sound.
Press the T-BASS button.
Each time it is pressed, the level changes. Select one of the
three levels, or the off position to suit your preference.
Low frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low frequency sound is originally
emphasized. In this case, cancel the T-BASS system.
ENGLISH
6