Display Window; Source Button; Number Buttons - Sony CDX-R3350EE Operating Instructions Manual

Refer to the pages listed for details. The
corresponding buttons on the card remote
commander control the same functions as those
on the unit.
a Volume +/– button
To adjust volume.
b ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
c DSPL (display)/DIM (dimmer) button
4, 8
To change display items (press); change the
display brightness (press and hold).
d OPEN shutter, disc slot (located behind
the shutter) 5
e Display window
f EQ3 (equalizer) button 9
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK,
CUSTOM or OFF).
g OFF button
To power off/stop the source.
h SEEK +/– button
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); fast-forward/
reverse a track (press and hold).
i
(front panel release) button 4
j SOURCE button
To power on/change the source (Radio/CD).
k MODE button 8
To select the radio band (FM/AM).
l SEL (select) button 4, 9
To select items.
m RESET button (located behind the front
panel) 4
n Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CD:
(1)/(2): GP/DISC –/+
To skip groups (press); skip groups
continuously (press and hold).
(3): REP 8
(4): SHUF 8
o SENS button
To improve weak reception: LOCAL/
MONO.
p SCRL (scroll) button 8
To scroll the display item.
q BTM button 8
To start the BTM function. (press and hold)
r Receptor for the card remote
commander
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
s < (.)/, (>) buttons
To control radio/CD, the same as (SEEK)
+/– on the unit. (For details of other
operations, see "With the card remote
commander" on each pages.)
t VOL (volume) +/– button
To adjust volume.
u M (+)/m (–) buttons
To control CD, the same as (1)/(2) –/+ on
the unit. (For details of other operations, see
"With the card remote commander" on each
pages.)
v Number buttons
To receive stored stations (press); store
stations (press and hold).
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 12.
7