Loewe Connect ID 40 DR+ Service Manual page 70

3D FAQs
Why a flickering of 3D-Playback is visible by daylight resp. extraneous light?
The transmission of synchronization signals is realized by infrared signal Other illuminants
can disturb this transmission
Furthermore some illuminants have innately a 50Hz flickering. This flickering can interfere
with the shutter-frequency of the glasses
When operating 3D-Mode a dimmed or dark room is highly recommended
How to charge the glasses?
The glasses can be charged by every common USB-interface by use of the accompanying
USB cable. The Loewe-TV in on-mode can act as "charging-station". Operating time per
charge ca 30h The charging takes ca 2h
Attention: The accompanying USB-cable is for charging only – data pins are not
connected
Does the glasses switch off automatically after use?
Yes!
As soon as no IR-synchronisation is received anymore the glasses switches off after
ca 1 minute
Does the TV recognize 3D-broadcasts automatically?
Yes!
It requires the 3D-mode set to "automatic" and the fully support from the broadcaster.
Attention: Many Stations do not support this feature yet
Can 3D-broadcasts be recorded on internal disc?
Yes!
GB
70