Midi Parameters - Korg KingKORG Parameter Manual

KingKORG Parameter Guide
Mode (Power Save Mode) . . . . . . . . . .[DispLow, DispOff, Disp&LEDOff]
This specifies what will happen when power conservation mode is activated.
DispLow:
The display will dim.
DispOff:
The displays will turn off.
Disp&LEDOff:
The displays and LEDs will turn of.
Time (Power Save Time) . . . . . . . . . . . . . . . . . . . . . . . [30sec, 1min, 5min, 15min]
This page is available if Mode is set to "DispOff" or "Disp&LEDOff".
This specifies the length of time until the displays and LEDs will go dark in
power save mode.
30sec 、 1min 、 5min 、 15min:
The illumination will go dark if the unit is not used for 30 seconds, 1
minute, 5 minutes, or 15 minutes respectively.
g15: Power Off
AutoPOff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[Disable, 4hours]
The KingKORG will automatically power-off if its keyboard, knobs, or buttons
when there has been no user input for a period of time. With the factory
settings, this is set to "4hours".
Disable:
The Auto Power Off function will be disabled. The power will not turn off
automatically.
4hours:
The power will turn off automatically when four hours have elapsed
without the buttons, knobs, or keyboard having been used.
Even if the demo songs are playing in succession, the power will turn off
automatically if there has been no user input at all for the specified
length of time. If you don't want the power to turn off, choose the
"Disable" setting.
When the power turns off, the settings that you had been editing will be
lost. If you want to keep your edits, you must save them.
7 .

MIDI parameters

Here is where you can adjust MIDI-related settings for the KingKORG.
g16~19: MIDI Basic
Global Ch (Global Channel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [01...16]
This specifies the MIDI channel. When you wish to transmit program changes
or system exclusive messages via MIDI, set the global MIDI channel to match
the MIDI channel of the connected MIDI device.
LocalControl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [Off, On]
Turns local control on or off.
Off:
The KingKORG's controllers such as the keyboard and joystick will be
disconnected from its internal sound generator.
When you've connected an external sequencer, this will prevent duplicate
notes from being triggered by the echo-back from the sequencer
(performance data sent when you play the KingKORG being re-
transmitted from the sequencer back to the KingKORG).
On:
Select this setting when you are using the KingKORG by itself.
Routing (MIDI Routing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [MIDI+USB, MIDI, USB]
This selects the connector(s) that will be used to transmit and receive MIDI
messages.
MIDI+USB:
The MIDI connectors and USB connector will be used to trans-mit and
receive MIDI messages. When receiving MIDI messages, the messages
from both types of connector will be mixed, and MIDI messages received
later will be given priority. For transmission, the same MIDI messages will
be transmitted from both connectors.
KingKORG
PC USB-MIDI Port
KingKORG MIDI OUT
USB MIDI RX (EXT)
KingKORG KBD/KNOB USB MIDI TX (INT)
USB MIDI TX (EXT)
KingKORG MIDI IN
KingKORG SOUND USB MIDI RX (INT)
USB:
Only the USB connector will be used to transmit and receive MIDI
messages.
KingKORG
PC USB-MIDI Port
KingKORG MIDI OUT
USB MIDI RX (EXT)
KingKORG KBD/KNOB
USB MIDI TX (INT)
USB MIDI TX (EXT)
KingKORG MIDI IN
KingKORG SOUND USB MIDI RX (INT)
MIDI:
Only the MIDI connectors will be used to transmit and receive MIDI
messages.
KingKORG
PC USB-MIDI Port
KingKORG MIDI OUT
USB MIDI RX (EXT)
KingKORG KBD/KNOB USB MIDI TX (INT)
KingKORG MIDI IN USB MIDI TX (EXT)
KingKORG SOUND USB MIDI RX (INT)
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [Auto, Int, Ext USB, Ext MIDI]
This selects the reference clock where the KingKORG's tempo will
synchronize.
If you specify an external device as the clock, the KingKORG's arpeggiator
and other functions that you've tempo-synchronized (such as LFO or delay)
can synchronize to the external device.
Auto:
If MIDI clock from an external MIDI device that's connected to the MIDI IN
connector is being received, the KingKORG will automatically function as
with the "Ext MIDI" or "Ext USB" setting. If no MIDI clock is being input,
the KingKORG will function as with the "Int" setting.
Int (Internal):
The KingKORG's internal clock will be used as the reference. You'll be
able to specify the tempo in the "a02:Arp" page. Choose this setting if
you're using the KingKORG by itself, or if you're using the KingKORG as
the master device where external MIDI devices will be synchronized.
Ext USB (External USB):
The KingKORG will synchronize to MIDI clock data from a computer that's
connected to the USB connector. You won't be able to set the tempo on
the KingKORG.
Ext MIDI (External MIDI):
The KingKORG's arpeggiator will synchronize to the MIDI clock messages
received from an external MIDI device that's connected to the MIDI IN
connector.
TIP: When sync'ing to an external MIDI device, refer to that device's owner's manual.
- 18 -
Parameters
MIDI OUT
MIDI IN
KBD/KNOB OUT TG OUTPUT
DUMP OUT etc... DUMP IN etc...
MIDI OUT
MIDI IN
KBD/KNOB OUT TG OUTPUT
DUMP OUT etc... DUMP IN etc...
MIDI OUT
MIDI IN
KBD/KNOB OUT TG OUTPUT
DUMP OUT etc... DUMP IN etc...