Table of Contents
Advertisement
Specifications
Drying method
Power requirements (*2)
Power consumption
Weight
During operation (*3)
Environ-
ment
Not operating
Included items
*1
• Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
• Depending on the ambient temperature and media width, the preset temperature may fail to be reached.
*2
• Be sure to connect the machine to an unshared electrical circuit.
*3
• Operating environment
*4
When this unit is used with a printer equipped with a cutting feature, no assurance is made with respect to the fol-
lowing points. Refer to the user's manual included with the printer.
• Distance accuracy (when cutting)
• Repetition accuracy (when cutting)
• Alignment accuracy for printing and cutting
• Alignment accuracy for printing and cutting when reloading media
20
DU2-64
Heating type (with blower fan), Set temperature: 30 to 50°C (86 to 122°F) (*1)
AC 100 to 120V ± 10%, 5.5 A,
50/60 Hz or AC 220 to 240 V ±
10%, 3 A, 50/60 Hz
Approx. 750 W
26 kg (57 lb.)
Temperature: 15 to 32°C (59 to 90°F) (20°C (68°F) or higher recommended), Humidity: 35 to 80% (no condensation)
Temperature: 5 to 40°C (41 to 104°F), Humidity: 20 to 80% (no condensation)
Power cord, arms, bushings, cable clamps, stays, hexagonal wrench, bolts,
washers, User's Manual
Use in an operating environment
within this range.
DU2-54
AC 100 to 120V ± 10%, 5.0 A, 50/60
Hz or AC 220 to 240 V ± 10%, 2.6 A,
50/60 Hz
Approx. 670 W
24 kg (53 lb.)
Advertisement
Table of Contents
