Figure 2.9 Mmb; Figure 2.16 Opl; B.2.3 List Of Led Displays For Different Boards And Components - Fujitsu PRIMEQUEST 480 System Design Manual

Appendix B Status Confirmation from LED
B.2.3 List of LED displays for different boards and components
List of LED displays
The following table shows LED states of different boards and their meaning:
Board,
component
OPL (operator Power
panel)
Alarm
MMB
Ready
Location
SB (system SB Power
board)
SB Alarm
Location
MMB MMB
(Management Power
Board) MMB
Alarm
Location
MMB
Active
MMB
Ready
LAN MMB LAN
100BASE-TX Link/Act
MMB LAN
Speed
B-6
Table B.1 LED list
LED Color
green 1
orange 1
green 1
blue 1
green 1
orange 1
blue 1
green 1
orange 1
blue 1
green 1
green 1
green 1/LAN port Off
green 1/LAN port Off
Number State
On
On
On
Blinking MMB initialization in progress
On
Blinking Cabinet identification
On
Blinking Hot swapping being performed
On
On
Blinking A component identified
On
On
On
Blinking A component identified
On
On
Blinking MMB initialization in progress
On
Blinking Data being transferred
green
On
Meaning
Equipment power-ON
(Op-panel 48V supplied)
An error in the cabinet
MMB in the standby state
(initialization complete)
Cabinet identification
48V supplied in the SB
An error in the SB
A component identified
12V supplied to the MMB
An error in the MMB
A component identified
Indicating the Active-MMB
MMB has been started.
Network disconnected
Network connected
Operation being performed at
10 Mbps
Operation being performed at
100 Mbps
C122-B001-02EN