Chrysler Sebring 2004 Service Manual page 98

JR
WHEEL ALIGNMENT (Continued)
SPECIFICATIONS
WHEEL ALIGNMENT
NOTE: All specifications are given in degrees.
FRONT WHEEL
ALIGNMENT
CAMBER
Cross Camber (Maximum
side-to-side difference)
CASTER
Cross Caster (Maximum
side-to-side difference)
TOE* - RIGHT OR LEFT
TOTAL TOE* **
REAR WHEEL
ALIGNMENT
CAMBER
TOE* - RIGHT OR LEFT
TOTAL TOE* **
THRUST ANGLE
*Positive (+) toe is toe-in, negative ( ) toe is toe-out.
**Total toe is the arithmetic sum of the left and right wheel toe settings. Total Toe must be equally split
between each front wheel to ensure the steering wheel is centered after setting Toe. Left and right toe
must be equal to within 0.02 degrees.
NOTE: All wheel alignments are to be set with the
vehicle at its proper curb height. (Refer to 2 - SUS-
PENSION/WHEEL ALIGNMENT - STANDARD PRO-
CEDURE).
PREFERRED SETTING
0.3°
0.0°
+3.3°
0.0°
+0.12°
+0.24°
PREFERRED SETTING
0.5°
+0.05°
+0.10°
0.00°
WHEEL ALIGNMENT
ACCEPTABLE RANGE
0.9° to +0.3°
0.7°
+2.3° to +4.3°
1.0°
+0.02° to +0.22°
+0.04° to +0.44°
ACCEPTABLE RANGE
0.9° to 0.1°
0.05° to +0.15°
0.10° to +0.30°
0.15 to 0.15°
2 - 61