Test Page - Motorola ST7000 Product Information Manual

MN002955A01-AA
Chapter 3: Man-Machine Interface
• Tone offset and ranges.
3.13

Test Page

Only authorized persons can use the Test Page option and this option must be enabled in the
codeplug.
NOTICE: If Test Page option is not enabled in the codeplug, you can only access the Key
Variable Loader (KVL) mode option. When using a KVL device (a portable device used to load
encryption keys to a secure entity), set the baud rate to 19200 bits/second.
Use the following key sequence to access the test page: Menu/OK → Up → Down → Back.
The following information is available in the test page.
• Ver Info – Version Information – displays software or hardware version information.
- Build Date – software build (a compiled version of software).
- CP Ver – Codeplug version.
- DSP Ver – Signaling Processor Software version.
- Host Ver – Application Software version.
- HardwareID – hardware identification number.
- EquipID – TETRA Equipment Identity (TEI).
- LLS version – Local Language Package version.
- Antenna Frequency Band
• Addresses;
- Home MNI – country identification code, network code.
- Group ID – number of the currently selected talkgroup.
- Own ISSI – Own Individual Short Subscriber Identity.
- ASSI – Alias Short Subscriber Identity.
• Err Logs – Error Logs – displays information about software errors.
• Cells Info – Cell Information – displays information about the foreground and background cells
(BTS sites). This menu displays the RSSI levels of the cells.
• Cell Lists – Displays frequency lists.
- Frequency List1 (32 variable frequencies)
- Frequency List2 (32 fixed frequencies)
- Frequency List3 (comprehensive hunt)
- Frequency List4 (comprehensive hunt)
•
Data Svc – Data Services – allows access to the air tracer enable, the conformance tests, and the
KVL mode.
- Air Tracer
- Conf Test – Conform test.
-
KVL Mode
NOTICE:
You can exit KVL Mode by power cycle.
- E2E Key Del
70 Send Feedback