Vehicle Controls; Horn Switch; Start Switch; Headlight Switch - Taylor-Dunn SS-025-34 Operation, Maintenance, And Replacement Parts Manual

Hide thumbs Also See for SS-025-34:
Table of Contents

Advertisement

SAFETY RULES AND OPERATING INSTRUCTIONS

VEHICLE CONTROLS

1) Horn Switch

The horn switch is located on the left side of the
floorboard. Depress the switch with your foot to sound
the horn, release it to turn it off.

2) Start Switch

The start switch is located at the lower right of the
dash panel of the Model SS and the front of the panel
on the model MX. Rotate the switch clockwise to
turn the vehicle power on, counterclockwise to turn
the vehicle power off.
The switch should be in the "OFF" position whenever
the operator leaves the vehicle.

3) Headlight Switch

4) Battery Status Gauge

The battery status gauge displays the relative charge
of the batteries. Refer to details later in this section.

5) Strobe Light Switch (optional)

MX-600

6) Forward/Off/Reverse Switch

The forward/reverse switch determines the direction
of travel. Push the top of the switch to travel in
forward, push the bottom of the switch to travel in
reverse. The switch also has a center Off position.
The switch should be in the Off position whenever
the driver leaves the vehicle.

7) Hour Meter (optional)

The hour meter counts the number of hours the
vehicle is in operation.

8) Charger Connector (MX-600 only)

Connection for portable charger.

9) Power Light (SS only)

The power light will be illuminated whenever the start
SS Models
switch is on.
Safety Rules
Page 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents