Vehicle Controls; Dash Up To Serial # 179669; Accessory Switch (Optional); Headlight Switch - Taylor-Dunn B0-248-36 Operation, T Roubleshooting And Replacement Parts Manual

SAFETY RULES AND OPERATING INSTRUCTIONS

VEHICLE CONTROLS

DASH UP TO SERIAL # 179669

1) Accessory Switch (Optional)

The accessory switch is located on the left side of the
instrument panel and to the right of the headlight switch.
Push the top of the switch to turn on the accessory. Push
the bottom of switch to turn off the accessory. The
accessory can be turned on with the key switch in the
"OFF" position. If a vehicle is equipped with windshield
wipers and one or more accessories, the windshield
wipers are controlled from this switch. Other accessories
are controlled from the auxiliary switch.

2) Headlight Switch

The headlight switch is located on the top left of the instrument panel. Push the right side of the
switch to turn the lights on. Push the left side of the switch to turn the light off.

3) Hi-Low Switch (optional)

The high-low switch is located on the lower left of the instrument panel. Toggle the switch lever up for normal speed.
Toggle the switch lever down for slow speed.

4) Smart View Display

Refer to details later in this chapter.

5) Forward-Off-Reverse Switch

The forward-off-reverse switch, located on the right side of the instrument panel, determines the direction of travel of
the vehicle. Push the top of the switch to engage the forward direction. Push the bottom of the switch to engage the
reverse direction.
DO NOT SWITCH from forward to reverse or vice-versa while the vehicle is in motion. Make sure the vehicle is
completely stopped before shifting.
The forward-off-reverse switch should be in the center "OFF" position, with the key-switch off and the park brake set
whenever the operator leaves the vehicle.

6) Horn Switch

The horn switch is located on the right side of the instrument panel. Depress the switch to sound the horn, release it
to turn it off.

7) Key-Switch

A key-switch, located on the right center side of the instrument panel, turns on the vehicle. Rotate the key clockwise
to turn the vehicle power on, counterclockwise to turn the vehicle power off.
The key-switch should be in the "OFF" position whenever the operator leaves the vehicle.
This switch is also designed to secure and disable the vehicle. The key can only be removed when the key-switch is
in the "OFF" position.
Safety Rules
Page 7