Horn Switch; Forward-Off-Reverse Switch; 3A) Light Switch; 3B) Hi-Low Switch - Taylor-Dunn B0-T48-48 Manual

Table of Contents

Advertisement

SAFETY RULES AND OPERATING INSTRUCTIONS

VEHICLE CONTROLS

1) Horn Switch

The horn switch is located on the right
side of the instrument panel. Depress
the switch to sound the horn, release it
to turn it off.

2) Forward-Off-Reverse Switch

The forward-off-reverse switch, located on the
right side of the instrument panel, determines the
direction of travel of the vehicle. Push the top of the
switch to engage the forward direction. Push the
bottom of the switch to engage the reverse direction.
DO NOT SWITCH from forward to reverse or vice-
versa while the vehicle is in motion. Make sure the
vehicle is completely stopped before shifting.
The forward-off-reverse switch should be in the center
"OFF" position, with the key-switch off and the park
brake set whenever the operator leaves the vehicle.

3a) Light Switch

The headlight switch is located on the top left of the
instrument panel. Push the right side of the switch to
turn the lights on. Push the left side of the switch to
turn the light off.

3b) Hi-Low Switch

The high-low switch is located on the lower left of
the instrument panel. Toggle the switch lever up for
normal speed. Toggle the switch lever down for slow
speed.

4) Combination Display

Functions for the Combination display are listed on
the following pages.

5) Reverse Alarm Disable

Turn the switch off (toggle down) to disable the
reverse alarm.

6) Key-Switch

A key-switch, located on the right center side of the
instrument panel, turns on the vehicle. Rotate the
key clockwise to turn the vehicle power on,
counterclockwise to turn the vehicle power off.
The key-switch should be in the "OFF" position
whenever the operator leaves the vehicle.
This switch is also designed to secure and disable
the vehicle. The key can only be removed when the
key-switch is in the "OFF" position.

7) Emergency Stop Switch

The emergency stop switch will immediately and
abruptly stop the vehicle.
The Emergency Stop Switch will stop the vehicle but
will still allow some functions to work such as the
parking brake bypass switch.
Do not depress the Emergency Disconnect
Switch while the vehicle is in motion unless
the vehicle must be stopped in an emergency.
Depressing the switch will immediately apply
the park brake, stopping the vehicle. The
abrupt stopping of the vehicle may result in
severe bodily injury.
Safety Rules
Page 5

Advertisement

Table of Contents
loading

Table of Contents