Start Video During An Audio Call; Adjust The Camera Position During A Call; Switch Between Video And Content During Video Calls - Polycom Trio 8500 User Manual

Start Video During an Audio Call

You can start sending video at any point during an audio-only call if a camera is connected to the system.
After you start sending video, you can mute your video, but you cannot stop sending video and return to
an audio-only call.
Procedure
1. In the Call screen, tap Start My Video.

Adjust the Camera Position During a Call

You can control the camera position during or before a video call when a Polycom EagleEye IV USB
camera is connected to a Polycom Trio Visual+ accessory paired with the Polycom Trio 8800 system.
Procedure
1. Do one of the following:
▪ During a call, select
▪ Tap
2. Select Near to adjust your camera or Far to adjust a call participant's camera.
3. Do one of the following:
▪ Use the onscreen arrows to adjust the camera position.
▪ Drag your finger across the onscreen video stream to adjust the camera position.
▪ Tap the plus sign to zoom the camera in or tap the minus sign to zoom the camera out.
▪ Move the slider to zoom the camera in or out.

Switch Between Video and Content during Video Calls

By default, when you or a video participant starts sharing content during a video call on Polycom Trio, the
content automatically displays in place of participant video streams during the call. You can choose to
display the video streams for participants or display any content being shared.
Note: You cannot hide content that is shared using Apple AirPlay. If you try to hide content, depending
on how the content is shared and the type of call, a message displays stating that you cannot
hide content and must stop the content instead.
Procedure
1. In the Calls screen, tap Toggle People/Content.
Smart Choice Communications | (800) 217-3096 | www.smartchoiceus.com | techsupport@smartchoiceus.com
Camera.
and select Camera.
™
Video Calls on Polycom Trio
© 2019 Smart Choice Communications, LLC