Front Axle - Front Wheel “Toe In Check”; Toe In Adjustment - Mahindra Jivo 365 DI Service Manual

TYRE MAINTENANCE
Front Axle - Front Wheel "Toe In Check"
In the event of the tie rod setting being interfered with, then it is necessary to adjust the TOE-IN.
Before measuring and adjusting the TOE-IN, ensure the front wheels are in the straight ahead
position and the front axle is not tilted. Calculation of Toe In-: (Refer image TOE-IN ADJUSTMENT)
Measure distance between centres of both front wheels from front of tractor. Let that distance be
"Y". Now adjust track rod ball joints such that distance" will remain same in front side of front
wheels and at rear side of front wheel distance will increase in 4 to 6 mm. let distance let distance
in rear of Front wheel be "X". Therefore X= (Y+4) To (Y+6) in mm

Toe In Adjustment

Procedure To Adjust Toe In-:
Loosen check nut of wheel cylinder from both sides and adjust Toe in position of front wheel.
While adjusting position maintain centre of ram in wheel cylinder with exact centre of Front axle
position.
14