Aztech WIPC302 User Manual page 36

User Manual
Firmware Upgrade Firmware Upgrade Firmware Upgrade Firmware Upgrade
This section allows user to change the current firmware and WEB UI version of the IP
camera
1. Click Browse to then select the folder path of the Firmware file.
2. Select the correct firmware file then click Open.
3. Click Submit for the firmware to load into the device.
Note: Note Note Note Do not unplug the Power Adapter or Reboot the device during Firmware Upgrade.
R R R R estore Default estore Default estore Default estore Default
This section allows user to set the IP Camera to its factory Default.
1. Click Restore to Default a pop message will appear.
2. Click OK for the device to go back to its Factory default.
Note Note Note: Note Do not unplug the Power Adapter when the device is Rebooting.
Page 36 of 51
All manuals and user guides at all-guides.com