Aztech WIPC302 User Manual page 20

User Manual
Date and Time Settings Date and Time Settings
Date and Time Settings Date and Time Settings
• Select the Timezone that you would like to set on your IP camera.
Network Network Settings Network Network Settings Settings Settings
DHCP/STATIC
• By default your IP camera is set to DHCP wherein it will automatically get an IP
address from the DHCP server.
• Uncheck the box to set Static IP address for the IP camera.
Port Number
• Input the port number that you would like to use for the IP camera (It is
recommended to use the default port number as some router is using port 80).
Wireless Settings Wireless Settings
Wireless Settings Wireless Settings
• Click Scan for the IP camera to search all the available Wireless Access Point.
• Select your Wireless Access Point then input the password on the required field.
DDNS Settings DDNS Settings DDNS Settings DDNS Settings
• You may use the default Manufacturer's DDNS for remote access into your IP
camera or you can select the Third party DDNS.
• In selecting a Third party DDNS, it is required to have an active DDNS account for
you to access the IP camera via the Internet.
Once you have completed the required information click Submit for the settings to take
effect.
Note: Note It is required to configure Port Forwarding on your router for you to access the IP camera via Internet.
Note Note
When using the Manufacturer's DDNS do not include the port number when accessing the IP camera
(example: http://WIPCxxxxxx.nwsvr.com
In using a Third Party DDNS it is required that you have an active DDNS account for you to access the IP
camera via the Internet else use the Manufacturer's DDNS. You may refer to the Third Party DDNS
server on How to register and create an account.
Check on the Frequently Asked Questions on how to access the IP camera on a smart phone.
Page 20 of 51
All manuals and user guides at all-guides.com
where xxxxxx is unique for every device).