Aztech WIPC302 User Manual page 24

All manuals and user guides at all-guides.com
User Manual
Port Number
• Input the port number that you would like to use for the IP camera (It is
recommended to use the default port number as some router is using port 80).
Note: Note Note Note If you have more than 1 IP Camera it is required to use different port number for each camera.
Example IP camera-1 port number 8081; IP camera-2 port number 8082
Wireless Settings Wireless Settings Wireless Settings Wireless Settings
This section allows user to configure the wireless settings of the IP camera.
1. Click Scan for the IP camera to search all the available Wireless Access Point.
2. Select your Wireless Access Point then input the password on the required field
then
3. Click Submit for the settings to take effect.
Note Note Note Note: Disconnect the Ethernet cable ONLY after the IP Camera reboots. Your IP Camera will automatically
connect to your Wireless Access Point within 2 minutes.
Page 24 of 51