Mazda MX-5 Miata Sport 2007 Manual page 2134

2007 ACCESSORIES & BODY, CAB Wiper/Washer System - MX-5 Miata
Fig. 3: Cleaning Wiper Arm Connector Shafts Using Wire Brush
Courtesy of MAZDA MOTORS CORP.
WIPER ARM AND BLADE ADJUSTMENT
1. Operate the wipers, and then turn off the wiper motor to set the wipers in the park position.
2. Slide the serrated connecting part and adjust the wiper arm and blade so that its end is aligned with the
clear dot in the black ceramic coating on the inside of the windshield.
NOTE:
2007 Mazda MX-5 Miata Sport
If the hollowed mark in the ceramic coating cannot be located,

measure the distance from the cowl grille end line, and adjust the
wiper arm and blade.