Mazda MX-5 Miata Sport 2007 Manual page 2107

2007 ACCESSORIES & BODY, CAB Glass/Windows/Mirrors - MX-5 Miata
1. Remove the sealant along the perimeter of the glass using a cutting a razor. (When reusing the glass)
2. Clean and degrease an approx. 50 mm {2.0 in} wide strip along the perimeter of the windshield.
3. Inspect the glass for cracks. If it is cracked, chamfer it using sandpaper.
4. Align the marks made before removal and install the pin to the windshield referring to the figure. (when
reusing the glass, and the pin was removed)
Fig. 31: Positions For Installing Pin To Windshield
Courtesy of MAZDA MOTORS CORP.
5. Install the windshield molding.
6. Use glass primer on the glass, then allow it to dry for approx. 30 min.
CAUTION:
NOTE:
Fig. 32: Identifying Windshield Molding
Courtesy of MAZDA MOTORS CORP.
2007 Mazda MX-5 Miata Sport
To prevent weakening of the primer adhesion, keep the bonding

surface free of dirt, moisture, and grease. Do not touch the
surface with your hand.
Make sure to apply primer to the hollowed marks in the ceramic

coating.