Mazda MX-5 Miata Sport 2007 Manual page 2111

2007 ACCESSORIES & BODY, CAB Glass/Windows/Mirrors - MX-5 Miata
Fig. 38: Identifying Lip With Section A-A
Courtesy of MAZDA MOTORS CORP.
10. Apply protective tape along the edge of the body.
NOTE:
Fig. 39: Identifying Protective Tape On Edge Of Body
Courtesy of MAZDA MOTORS CORP.
11. Insert the SST (piano wire), which has been cut to sufficient length from inside the vehicle.
WARNING:
NOTE:
2007 Mazda MX-5 Miata Sport
Overlap and adhere the protective tape to the corners to prevent

damage.
Using the SST (piano wire) with bare hands can cause injury.

Always wear gloves when using the SST (piano wire).
Before removing the rear window glass from the body, mark the

position of the glass by affixing tape to the glass and body panel.