Mazda MX-5 Miata Sport 2007 Manual page 2115

2007 ACCESSORIES & BODY, CAB Glass/Windows/Mirrors - MX-5 Miata
Fig. 46: Identifying Rear Window Pin
Courtesy of MAZDA MOTORS CORP.
8. Press completely along the perimeter of the glass so that the measurement of the molding lip gap is within
the specification.
9. Connect the filament connector.
10. Install the following parts:
1. Rear deck lock cover (See DETACHABLE HARDTOP ADJUSTMENT .)
2. Rear trim (See REAR TRIM INSTALLATION [DETACHABLE HARDTOP] .)
3. B-pillar upper trim (See B-PILLAR UPPER TRIM INSTALLATION [DETACHABLE
HARDTOP] .)
4. Side lock
5. B-pillar garnish
6. Detachable hardtop
11. Allow the sealant to harden completely.
Sealant hardening time: 24 h
Fig. 47: Identifying Molding Lip Gap
Courtesy of MAZDA MOTORS CORP.
REAR WINDOW GLASS REMOVAL/INSTALLATION[POWER RETRACTABLE
HARDTOP]
2007 Mazda MX-5 Miata Sport