Selecting The Desired Massage Action; Dynamic Massage Sequencer™ (On Select Models) - Dimension One Spas REFLECTIONS series Owner's Manual

Reflections Collection

11.13 Selecting the Desired Massage Action

Your D1 hot tub is equipped to allow you to customize the
massage action you desire. Each model incorporates massage
selector(s) that allows you to customize the massage and
performance by diverting water between various jet systems.
Simply turn the massage selector to divert water pressure to various jet
groups.
Note: It is considered normal for sound levels within the valve to vary
between positions due to the large amounts of water flowing through
it. For optimum filtration benefits, leave the valve in the center position
when the hot tub is covered.
11.14 Dynamic Massage Sequencer™ (On select models)
The Dynamic Massage Sequencers control the jets in the lounge areas
to sequentially massage different muscle groups, Figure 11.14a. When
selecting a massage sequence, the human figure on the control panel
displays corresponding lights, allowing a preview of that sequence before
starting it.
= Light Button: Turns the hot tub lights on and off.
= Jets button: Turns the jet pump associated with the
Sequencer on or off.
= Speed button: Changes the amount of time between each
step of the massage sequence. The default time is 5 seconds
intervals. The speed light will blink quickly.
• Press the speed button again to change it to 15 seconds
intervals. The speed light will blink slowly.
• Press again to change it to 30 seconds intervals. The
speed light will blink very slow.
= Start/Stop Button: Press to start a massage sequence.
Press again to pause the massage in one of the six zones.
Press again to reactivate the sequence.
= Sequence Button: Chooses between the six different
massage sequences. Continually press to scroll through the
zones until the desired sequence is reached. The light glows,
under the selected number, to indicate the current sequence
that is active.
Page 28
1 2 3 4 5 6
Figure 11.14a