Other Additives; Protective Conditions/Error Messages - Dimension One Spas REFLECTIONS series Owner's Manual

14.4

Other Additives

Many other additives are available for your hot tub. Some are necessary
to compensate for out-of-balance water, some aid in cosmetic water
treatment and others simply alter the feel or smell of the water. For
specific guidance, on maintaining water quality, consult your authorized
dealer who can recommend the appropriate chemical products.

15.0 Protective Conditions/Error Messages

There are a number of unique functions designed into your D1 hot tub to
protect it from damage and/or to aid in troubleshooting. The error indica-
tor as well as a screen will notify you when the hot tub needs imme-
diate attention. Following is a listing of all the possible messages along
with their meanings. Always insist on genuine Dimension One Spas
replacement parts.
Code Description
High Limit circuit has tripped. This must be repaired only
HL by a qualified authorized service organization or service
technician.
•
FLO •
DO NOT ENTER THE WATER!
is too high. Contact your authorized dealer or service
organization.
OH
Temp probes or detection circuit are defective. This
Pr must be repaired only by a qualified authorized service
organization or service technician.
Elevated internal temperature. Controller temperature has
exceeded acceptable limits. If condition persists, provide
AOH
shade for equipment side of spa. Contact your authorized
dealer or service organization.
No flow condition for more than 2 hours. Contact your
authorized dealer or service organization.
No flow condition "HR A" hardware error was
detected (relay stuck). Contact your authorized
dealer or service organization.
WARNING:
! HEATING) CAUSING SEVERE INJURY, BURNS,
OR WELTS.
Reflections Collection
Spa temperature
RISK OF HYPERTHERMIA (OVER-
Page 45