Without Speed Control; With Speed Control - Dodge D150 1990 Service Manual

• BRAKES 5 - 9
brake pedal bracket. The s w i t c h is actuated by the
brake pedal blade on a l l models and is adjusted as
follows:
WITHOUT SPEED CONTROL
(1) Loosen switch assembly to pedal bracket attach-
i n g screw and slide assembly away from pedal blade
or s t r i k e r plate.
(2) Push brake pedal down a n d allow to r e t u r n to
free position, do not p u l l brake pedal back a t any
t i m e .
(3) Place appropriate spacer gauge on pedal brake.
(4) Slide switch assembly t o w a r d pedal blade u n t i l
switch plunger is f u l l y depressed against spacer
gauge w i t h o u t m o v i n g the pedal.
(5) R e t i g h t e n t h e switch bracket screw to 9 N»m
(82 in-lbs).
(6) Remove spacer. Be sure t h a t stop lamp switch
does not prevent f u l l pedal r e t u r n . Incomplete pedal
r e t u r n can cause brake d r a g and premature l i n i n g
and rotor wear.
WITH SPEED CONTROL
(1) Push s w i t c h t h r o u g h clip i n m o u n t i n g bracket
u n t i l s w i t c h is sealed against bracket. The brake
pedal w i l l move f o r w a r d s l i g h t l y .
(2) Gently p u l l back on the brake pedal as far as i t
w i l l go.
(3) The s w i t c h w i l l ratchet backwards to the correct
position a n d no f u r t h e r adjustment is required.