Bunn New Infusion Series Programming Manual page 30

TROUBLESHOOTING (cont.)
PROBLEM
Brew cycle will not start
PROBABLE CAUSE
1. No water
2. No power or incorrect voltage to
the brewer
3. ON/OFF switch
4. Brew switch
5. Brew valve
6. Control Board
Page 30
REMEDY
Check plumbing and shut-off
valves
Check for voltage across the termi-
nals at the terminal block.
Test the ON/OFF switch.
Test the BREW switch.
Test the brew valve.
Substitute a control board known
to be in good working order.
Check plumbing and shut-off
valves
53867 050117