Changing Cds; Selecting Cd Changers; Maintenance - Sony XR-C102 Operating Instructions Manual

Changing CDs

During playback, press either the
or button momentarily.
2
DISC
1 2
To return to the
previous disc

Selecting CD Changers

(with two CD changers connected)
Press the CD
playback.
Each time you press, another CD changer is
selected.
CD I ˜ CD II
EN
10
Actual total number
1
DISC
1 2
To advance to
the next disc
button during CD

Maintenance

Fuse Replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse
blows again after replacement, there may be an
internal malfunction. In such a case, consult
your nearest Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as
this could damage the unit.
Cleaning the Connectors
The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing the RELEASE
button, then detach it and clean with a cotton
swab dipped in alcohol. Do not apply too
much force. Otherwise, the connector may get
damaged.
Main unit
Back of the front panel
E
Sony XR-C102 ( ,F,G,I) 3-856-658-31 (2)
Fuse (10 A)