Changing The Sound And Display Settings; With Optional Equipment; Cd/Md Unit; Playing A Cd Or Md - Sony WX-C770 Operating Instructions Manual

Changing the sound and
display settings
You can set:
• Clock (page 6).
• Amber/Green to change the illumination
color to amber or green.
• Dimmer to change the brightness of the
display.
—Select "Auto" to dim the display only
when you turn the lights on.
—Select "on" to dim the display.
• Beep to turn on or off the beeps.
• RM (Rotary Remote) to change the operative
direction of the controls of the rotary remote.
—Select "norm" to use the rotary remote in
the factory-set position.
—Select "rev" when you mount the rotary
remote on the right side of the steering
column.
• Loud (Loudness) to enjoy bass and treble
even at low volume. The bass and treble will
be reinforced.
• A.Scrl (Auto Scroll) (page 7, 20).
• Disc MEMO/TEXT name (Disc memo/CD
TEXT name) to set the priority display item
when you connect an optional CD changer
with the CD TEXT and disc memo function
(page 9, 22).
1
Press (SHIFT).
2
Press (8) (SET UP) repeatedly until the
desired item appears.
Each time you press (8) (SET UP), the item
changes as follows:
Clock n Amber/Green n Dimmer n Beep n
RM n Loud* n A.Scrl* n Disc MEMO/TEXT
name*
* When you have not tune the station or there
is no CD/MD being played, these items will
not appear.
Note
The displayed item will differ depending on
the source.
3
Press (10) (n) to select the desired
setting (for example: on or off).
4
Press (SHIFT).
After the mode setting is complete, the
display goes back to normal playback
mode.

With Optional Equipment

CD/MD unit

This unit can control a maximum of seven
external CD/MD units in this configuration:
— CD unit - maximum of five
— MD unit - maximum of five
If you connect an optional CD changer with
the CD TEXT function, the CD TEXT
information will appear in the display when
you play back a CD TEXT disc.

Playing a CD or MD

Press (CD/MD) until the desired changer
appears.
MD/CD playback starts.
When a MD/CD unit is connected, all the
tracks play from the beginning.
Changing the displayed item
Each time you press (CD/MD) during CD, CD
TEXT disc or MD playback, the item changes
as follows:
Elapsed playback time
Disc name* 1
Track name*
Clock
If you have not labeled the disc or there is no
* 1
disc name prerecorded on the MD, "NO
D.Name" appears in the display.
2 If you play a CD TEXT disc, the artist name
*
appears in the display after the disc name. (Only
for CD TEXT discs with the artist name)
3 If the track name of a CD TEXT disc or MD is not
*
prerecorded, "NO T.Name" appears in the
display.
You can label a personalized name for CDs
and CD TEXT discs with the disc memo
function, refer to "Labeling a CD" (page 21).
Tip
If the name of the MD or CD TEXT disc is too long,
you can scroll it across the display window by
pressing (SCRL) while the disc name or track name
is displayed.
$
$
/Artist name* 2
$
3
$
EN
19