Crankcase Front Cover Oil Seal Removal - GMC T Series 1994 Repair Manual

f lP '
1 BRACKET ASSEMBLY, ACCESSORY
2 OUTLET, COOLANT
3 ADAPTER, COOLANT OUTLET
4 THREMOSTAT
5 NUT - 10 N-m (89 LBS. IN.)
1 BOLT - 25 N-m (18 LBS. FT.)
Figure 10 - Coolant Pump and Coolant Inlet
Clean
• Sealing surface on block and crankcase front
cover.
CRANKCASE FRONT COVER OIL
SEAL REMOVAL
Tool Required:
J 35468 Seal Centering Tool
Remove or Disconnect
1. Oil seal. Pry out with a large screwdriver.
STUD - 10 N-m (89 LBS. IN.)
BOLTS - 50 N-m (37 LBS. FT.)
BOLTS - 50 N-m (37 LBS. FT.)
GASKET, COOLANT OUTLET ADAPTER
Figure 9 - Coolant Outlet, Thermostat and Adapter
L39100-68-J— EDS
1 BOLT
2 WASHER
3 CRANKSHAFT PULLEY
4 CRANKSHAFT PULLEY HUB
5 KEYWAY
FRONT
OF
ENGINE
SR202LN2-EDS
M C 0 0 1 2 -6 A 2 —L -E D S