L51750-001 – For use only on computer models in luminous green finish
●
●
L19170-001 – For use only on computer models in natural silver finish
●
L51749-001 – For use only on computer models in plum mauve finish
L19171-001 – For use only on computer models in rose gold finish
●
2.
Remove the two Phillips M2.5×5.0 screws (P1 driver) under the rubber feet.
3.
Remove the three Phillips M2.0×4.0 screws (P0 driver) along the front edge on the bottom cover
4.
Starting under the hinges, use a thin plastic tool (1) to pry the bottom cover off the computer (2).
5.
Remove the bottom cover (3).
Reverse this procedure to install the bottom cover.
52
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts