Primary Controls; Dials; Switches - Camtraptions PIR V3 Manual

Primary Controls
The PIR is configured via three dials and a bank of six switches on the front.
There is also an On-off switch on the bottom of the device.

Dials

The dials control the following functions:
Sensitivity – See Page 14
Time Variable – See Page 15
Luminosity Threshold or Secondary Time Variable – See Page 16
Note that the behaviour of the Time and Luminosity Dial varies based on the
program. The behaviour of the Sensitivity Dial is the same for all programs.

Switches

The switches control the following functions:
1 & 2: Day / Night behaviour
Still mode
3: Dial function
4, 5, 6: Transmitter Program
Video mode:
3: Extend video length on additional motion off/on
4, 5 & 6: Video Program
Camtraptions PIR Motion Sensor v3 Manual Page 4