Special Cuts; Cutting Bowed Material - Central Machinery 90597 Assembly And Operating Instructions Manual

cut as described above.
Caution: Never make any cut without firmly clamping down the workpiece.
Aluminum Cutting -- Aluminum extrusions such as those used when making aluminum
screen and storm windows can easily be cut with the miter saw.
1. Position the workpiece so that you will be cutting the thinnest cross section. See
Figure J. Clamp the material to the Fence or Base.
2. Use a wax lubricant when cutting aluminum. Apply the stick wax directly to the
(stopped) saw blade before cutting. The wax provides proper lubrication and keeps
chips from adhering to the saw blade.
1. When cutting bowed material, always position it as shown in Figure K.
Positioning the material incorrectly will cause it to pinch the saw blade near the
completion of the cut. Clamp the material to the Fence or Base.
SKU 90597

Special Cuts

Figure J

Cutting Bowed Material

Figure K
Page 15