Panasonic KX-UDS Series Step By Step Installation page 16

2.2 Basic Network Configuration <Step1> : Basic Network Setting

This step is no need if you use DHCP server.

1. Turn on the CS

(Super Master・Slave・

Air Sync Master)

while holding

RESET Switch.

2. Release the RESET Switch when

the LED flashes [Green/Red/Amber] alternately,

then the IP address is set to [192.168.0.241].

LED: Green > Amber > OFF > Green/Red/Amber alternate flashing

3. Log in to

http://192.168.0.241/

4. Input ID and password for administrator.

ID : admin

Password : adminpass

5. After log in, Configure network settings

of CS and click [Save].

[Network] → [Basic Network Setting]

6. Log in to the Web user interface again

using the newly assigned IP address for the CS.

Table of Contents

Kx-udt series