Adapter Casing (S5 Adapter)
A.3
Inserting S5 Modules in the Adapter Casing
Procedure
Proceed as follows to insert an S5 module in the adapter casing:
1. Set an interrupt circuit on the module, which sets the destination CPU for
2. Unscrew and remove the interlocking plate on the adapter casing.
3. Insert the module in the adapter casing's guide tracks and push.
4. Screw the interlocking plate back into place.
5. On S5 modules with locking knob, push the knob in and turn it so that the
Figure A-2 shows how to insert an S5 module into the adapter casing.
Bild A-2
A-4
interrupts (in the case of interrupt-generating modules only).
Interrupt Circuit...
/INT A
/INT B
/INT C
/INT D
The rear plug connectors snap into the adapter casing's socket connectors.
knob slot is vertical.
Interlocking plate
Inserting an S5 Module into the Adapter Casing
... Corresponds to Destination CPU
CPU 1
CPU 2
CPU 3
CPU 4
Locking knob
(not every module has one)
EWA 4NEB 811 6120-02b
IP 240