Table of Contents
Advertisement
clogged or dirty nozzle.
To clean nozzles:
■ Make sure both the fan switch and pump switch are in
the OFF ( O ) position.
■ Remove the battery pack.
■ Remove the brass nozzles from each side of the fan.
■ Soak nozzles in a nozzle cleaner (not included) to
loosen foreign materials clogging or restricting the
nozzle.
■ Using a garden hose, flush debris out of nozzle by
back flushing (running the water through the nozzle
backwards or from the outside to the inside).
■ Reconnect the nozzles.
FILTER MAINTENANCE
See Figure 9.
Periodically check the filter at the end of the intake tube for
debris and to make sure it is in good condition. Remove the
plastic filter cover and rinse or replace the filter, then close
the cover back together.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and
packaging
environmental-friendly recycling.
SYMBOLS
Safety alert
No-load speed
Please read the instructions carefully
before starting the machine.
Airflow velocity or blowing speed
Improper
or leaks can result in a slip and fall
hazard.
Contact with moving fan blades can
cause serious personal injury.
Failure to keep long hair away from air
inlet could result in personal injury.
should
be
sorted
for
hose
connections
and/
Safety
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.
9
Hide quick links:
Advertisement
Table of Contents
