Troubleshooting; Product Specifications; Battery And Charger - Ryobi R18MF Original Instructions Manual

TROUBLESHOOTING

PROBLEM
Leak at nozzle or threaded hole
Fan will not start

PRODUCT SPECIFICATIONS

Voltage
Fan speed
Weight
Bucket diameter
Max hose water pressure
- in PSI
- in kPa
- in bar
Pump speed
Water flow
Air velocity
POSSIBLE CAUSE
Nozzles were installed improperly.
Nozzles clogged or dirty.
Battery is defective or fully discharged.
18 V
1400 / 2200 min
-1
2.53 kg
290 - 304 mm
75 PSI
500 kPa
5 bar
5400 min
-1
5.1 LPH
390 m/min
Reinstall nozzles and tighten securely.
Clean nozzles.
Charge battery or contact customer service.

BATTERY AND CHARGER

Model Compatible battery pack
(not included)
Lithium-Ion RB18L13
RB18L15
RB18L25
RB18L26
RB18L40
Nickel RB18N15
Cadmium
* for vehicles with 12V DC outlets
Techtronic Industries (Australia) Pty. Ltd.
Level 1, 660 Doncaster Road
Doncaster, VIC 3108, Australia
Techtronic Industries New Zealand Ltd.
18-26 Amelia Earhart Avenue
Mangere, Auckland 2022, New Zealand
SOLUTION
Compatible charger
(not included)
BCS618G
BCL14181H
BCL14183H
BCL1418IV*
ACR1800G
BCS618G
BCL14181H
BCL14183H
BCL1418IV*