Invacare Aquatec Ocean User Manual page 18

Aquatec® Ocean / Ocean XL
Removing/fitting the heel strap
1. Open the Velcro® strip E on the heel strap.
2. Remove the screw F from the underside of the foot
plate.
3. Remove the heel strap from the flexible plastic pin.
To attach the strap, carry out the same procedure
in the reverse order.
IMPORTANT!
– When installing ensure that the Velcro® strip of
the heel strap is facing backwards.
Removing/fitting the seat plate
Removing:
1. Pull the seat plate upwards on both sides.
Fitting:
CAUTION!
Risk of getting fingers caught
– Do not insert fingers between the seat surface
and the seat frame when pressing down on
the seat plate.
1. Place the seat plate on the seat frame with the cutout
to the front.
2. Push the seat plate backwards as far as it will go.
3. With your hand flat, press the seat plate down at the
sides and then at the front and back until the seat plate
snaps into the seat frame.
18 1552757-G