Invacare Aquatec Ocean User Manual page 14

Aquatec® Ocean / Ocean XL
IMPORTANT!
The armrests are lowered using the same
procedure.
– When converting to the lower position, the belt
that lies beneath the armrest must be opened
and passed inside the backrest frame.
Fitting the footrests
1. Push the footrest B with the footplate D into the guide
H at the front of the side part I until the groove A
engages with the pin of the clip G. The footrest can no
longer be turned to the side.
The assembly procedure is the same for the right
and the left footrests.
Adjusting the height of the footrests
14
1. Pull up the footrest B slightly.
2. Pull out the clip G and put it in again at the required
position. Pull out the footrest slightly further if
necessary.
3. Push down the footrest until the groove A catches the
pin of the clip.
4. Set the other footrest to the same height as described.
Adjusting the inclination of the foot plates
IMPORTANT!
– The inclination of the foot plates can be
adjusted infinitely variably.
– Make sure that the right and left foot plate is
adjusted in the same way.
1. Loosen the Allen screw C on the foot plate using a size
4 Allen key.
2. Turn the foot plate D to the desired position.
3. Re-tighten the Allen screw.
1552757-G