Ricoh SG 3100SNw Firmware Updates page 6

1. Double-click [Product Name_FWUpdateManager.bat] to start the update.
The Wireless LAN Firmware Update Wizard starts.
If you select [Ethernet] for [LAN Type] on the control panel, go to step 7.
Product Name represents the machine name.
2. Check the displayed details, and then click [Next >].
3. Check that the system version for [Update Data] is newer than the system
version for [Wireless Controller], and then click [Next >].
4. Click [OK].
Do not switch the machine off while updating.
6