Belt Tensioners; Front Hood Operation; To Open The Front Hood - Generac Power Systems MAGNUM MMG75D Operating Manual

General Information
To reset the controller and resume operation, press the Enter () button.

BELT TENSIONERS

John Deere engines use two types of belt tensioners: manual and automatic. Adjust the belt using the manual
tensioner according to the manufacturer's specifications. The automatic tensioner cannot be adjusted or repaired
and is designed to maintain proper tension over the belt's life. Units with the automatic belt tensioner must be inspected
according to the manufacturer's specifications.

FRONT HOOD OPERATION

Stay clear of hood and lift structure when opening and closing generator hoods.

To Open the Front Hood

1. With your right hand, grip the handle located on the front panel.
2. With your left hand, pull the hood latch located on the upper corner of the hood. See Figure A. Tilt the hood
open until it contacts the bulkhead panel.
Generator hoods are heavy. Use caution when opening or closing.
20
Figure A
Figure 10 - Front Hood Operation
WARNING
Personal injury could result.
MMG75D-100D Operating Manual
CAUTION
01891
33701 C