Generator Monitoring; Engine Monitoring; Diesel Exhaust Filter Monitoring - Generac Power Systems MAGNUM MMG75D Operating Manual

Diesel generator ith power zone controller

Hide thumbs Also See for MAGNUM MMG75D:

Owner's manual (48 pages)

Table Of Contents

Table of Contents

General Information

Status Tab

The Status tab contains the status and configuration of the controller, firmware and data connections.

Generator Monitoring

Generator information is displayed on both the Generator button screen and Generator tab within the maintenance

screens. For more information, refer to

Engine Monitoring

Engine information is displayed on both the Engine operator screen and Engine tab within the maintenance screens.

For more information, refer to

Diesel Exhaust Filter Monitoring

This unit is equipped with a Diesel Particulate Filter (DPF) to meet current EPA emissions standards. This section

gives an explanation of the indicators that are displayed on the DPF Status page of the Engine tab.

To access the DPF Status page, press any direction arrow (▲, ►, ▼, ◄) to enter the maintenance screens, and

then while on the Engine tab, press the ▼ button to toggle through the pages until the DPF Status page appears.

There are four areas on the DPF Status page that communicate various information to the operator. The areas and

the indicators that appear in those areas are explained here:

SITE

Return Delay

Scheduler Enabled to run Reserved Reserved

Event

Week

Day

Start

Stop

GEN

All

Monday