Remote Commander - Sony TRV312 Operating Instructions Manual

Identifying the parts

Remote Commander

Using the Remote Commander
Make sure that COMMANDER is set to ON in the menu system.
The buttons that have the same name on the Remote Commander as on the camcorder
function identically.
1
2
3
1 Transmitter
Point toward the remote sensor to control
the camcorder after turning on the
camcorder.
2 Tape transport buttons (p. 21, 22)
To prepare the remote commander
Insert two size AA (R6) batteries by matching the + and – on the batteries to the
diagram inside the battery compartment.
Note on battery life
The batteries for the Remote Commander last about 6 months under normal
operation. When the batteries become weak or dead, the Remote Commander does
not work.
To avoid damage from possible battery leakage
Remove the batteries when you will not use the Remote Commander for a long time.
72
3 Size AA (R6) battery compartment
4 START/STOP button (p. 11)
5 Power zoom button (p. 13)
The zooming speed is unchangeable on
the Remote Commander.
4
5