Miele FNS 37402i Operating And Installation Instructions page 73

Fitting a furniture door
The furniture door must be a minimum
of 16 mm thick and a maximum of
19 mm thick.
The following dimensions for gaps must
be adhered to:
– The gap between the furniture door
and the kitchen unit door above must
be at least 3 mm.
– The vertical gap between the
furniture doors should generally be
3 mm. The exact value is dependent
upon the radius of the edge of the
furniture door.
If the appliance is being built into a run
of units, the height of the furniture door
should be aligned with adjacent kitchen
units.
The furniture door must be mounted
plane and free of tension.
Installing the appliance
Fitting a door which is heavier than the
maximum permitted could damage the
hinges, which could in turn affect the
functioning of the appliance.
Before fitting a furniture door, ensure
that the weight of the door does not
exceed the maximum permitted:
Appliance
FNS 37402 i
To fit large or segmented furniture
doors, a mounting kit or another pair
of fixing brackets can be ordered from
Miele.
Maximum weight
of furniture door in
kg
26
73