Miele FNS 37402i Operating And Installation Instructions page 67

Preparing the appliance
 Position the appliance in front of the
housing unit.
 Slide the cover strip  into the
holders from the front as shown.
Installing the appliance
 Screw the fixing brackets  into the
pre-drilled holes in the appliance door
using the hex screws .
 Secure a second pair of fixing
brackets  in the handle area of the
door. Use the pre-drilled holes in the
appliance door.
 Push the appliance about two thirds
of the way into the building-in niche.
When pushing the appliance into its
niche make sure that the mains cable
does not get trapped.
Useful tip: To help you push it into
position, tie a piece of string around the
plug to "increase" the length of the
connection cable.
Then pull the cable by the end of the
string through the housing unit. This
way it will be easier to connect it once
the appliance is in the unit.
67