Miele FNS 37402i Operating And Installation Instructions page 69

 Carefully remove the protective foil
from the sealing strip .
 Fix the sealing strip  flush with the
front of the appliance on the door
opening side.
1. Position the sealing strip flush with
the lower edge of the top fixing.
2. Stick it down along its entire length.
Installing the appliance
Installing the appliance
If the appliance is pushed too far into
the niche, the door may not close
properly once the furniture panel has
been fitted. This can cause ice to
build up, condensate to accumulate
and lead to faults in the appliance.
These can all lead to increased
energy consumption.
Push the appliance into the building-
in niche making sure a gap of 42 mm
is maintained all round between the
appliance carcase and the front of
the housing unit side walls.
69