Problem
The sensor control is
lit up.
The sensor control is
lit up.
Cause and remedy
The charcoal filter needs to be reactivated.
If the cooker hood is being operated in Recircula-
tion mode, reactivate the charcoal filter as de-
scribed in the operating and installation instruc-
tions supplied with the recirculation box. Reset the
operating hours counter (see "Cleaning and care"
– "Resetting the charcoal filter operating hours
counter" in these operating and installation in-
structions).
If the cooker hood is being operated in Extraction
mode, reset the operating hours counter (see
"Cleaning and care" – "Resetting the grease filter
operating hours counter" in these operating and
installation instructions).
The grease filter must be cleaned.
Clean the grease filter as described in "Cleaning
and care" –"Grease filter/Extraction grille".
Problem solving guide
59