Table of Contents
Advertisement
Problem
An operating noise can
be heard after the appli-
ance has been switched
off.
The sensors show in-
creased sensitivity or
fail to react.
alternating with
flashes in the timer dis-
play and a buzzer
sounds.
1 and a number, e.g. 1-0
flashes alternately with
a 3 digit number in the
timer display.
Cause and remedy
The cooling fan runs until the hob has cooled down
and then switches off automatically.
The sensitivity level of the sensors has changed.
Make sure that there is no direct light (from the sun
or from an artificial source) falling onto the hob.
The area surrounding the hob must not be too
dark.
Make sure that there is nothing covering the
sensors or the hob.
Take any pans off the hob and wipe away any food
deposits.
Interrupt the power supply to the hob for approx. 1
minute.
If the problem persists after power has been re-
stored, please contact Miele.
The hob is incorrectly connected.
Disconnect the hob from the mains electricity sup-
ply.
Call Miele Service. The hob must be connected to
the mains according to the wiring diagram.
Cooking zone fault
Interrupt the power supply to the hob for approx. 1
minute.
If the problem persists after power has been re-
stored, please contact Miele.
Problem solving guide
57
Advertisement
Table of Contents
