Toshiba RAV-GP561ATP-E Service Manual page 79

No. Part name
1. Side cabinet (right)
…
Side cabinet
2. Side cabinet (left)
1) Perform step 1 in
†
Fan motor
2) Remove the flange nut fixing the fan motor
3) Remove the propeller fan.
4) Disconnect the connector for fan motor
5) Remove the fixing screws (4 pcs.) holding
Procedure
1) Perform step 1 in ‚
and all the steps
ƒ
.
in
2) Remove the fixing screw (ST2TØ4 × 10L
3 pcs.) used for securing the side cabinet
(right) to the bottom plate and valve fixing
panel.
1) Perform step 1 in ‚
.
2) Remove the fixing screw (ST2TØ4 × 10L
3 pcs.) used for securing the side cabinet
to the bottom plate and heat exchanger.
‚ and all steps in
and the propeller.
• Flange nut is loosened by turning clock-
wise. (To tighten the flange nut, turn
counterclockwise.)
from the inverter.
by hands so that the fan motor does not
fall.
* Precautions when assembling the fan
motor
Tighten the flange nut using a tightening
torque of 4.9 N•m.
ƒ
.
- 79 -
FILE NO. SVM-18041
Remarks