Getting started
Step 1: Charging the battery pack
3
5
DC IN jack
You can charge the "InfoLITHIUM" battery pack NP-FH50 (p. 115) after attaching it to your
camcorder.
You cannot attach any "InfoLITHIUM" battery pack other than NP-FH50 to your camcorder.
1
Connect the AC Adaptor to the DC IN jack on the "Handycam" Station
Cradle.
Be sure that the mark on the DC plug is facing up.
2
Connect the power cord (mains lead) to the AC Adaptor and the wall
outlet (wall socket).
3
Turn off your camcorder by closing the LCD screen.
4
Insert the battery.
Open the battery/Memory Stick Duo cover.
Insert the battery in the direction of the arrow all the way in until it clicks.
Close the battery/Memory Stick Duo cover.
5
/CHG (charge) lamp
1
DC plug
AC Adaptor
4
2
Power cord
(Mains lead)
18
Battery pack
To the wall outlet
(wall socket)