Advertisement
HIGH PASS PROCESSED output jack (11)
Provides a filtered signal for use with full-range powered speaker systems like the SP® 2P or SP® 4P. Follow the
instructions in the Setup Wizard in the SP® 118P Sub menu on the LCD screen using the Push-To-Select button
for proper set-up and connections. Or see the section titled: "ALTERNATE METHOD OF CONNECTING A
SATELLITE SPEAKER TO THE SUB".
LCD Display (12)
Provides a menu read-out manipulated and activated by the Push-To-Select button (13)
Push-To-Select button (13)
Rotary knob that allow the user to select and choose menu options on the LCD display screen (12). Pushing the
button in till it detents makes a menu choice, selecting the action or option highlighted in the LCD screen.
Safety Information
Cautions
The unit must be disconnected from the AC power source before any work is done on it. Refer all servicing
to qualified service personnel.
The back plate can become hot to the touch. Do not block or cover the fan or the exhaust louvers from ventila-
tion. There must be a minimum of 4" of space behind the fan. Do not allow the airflow to be become blocked
by objects such as curtains or drapes, thermal building insulation, etc. It is recommended that the rear of the SP®
118P Sub not be placed in a closed space or a space that has no fresh, cool airflow.
Be sure to keep the microphone away from the front of the speaker after connecting it to the input, and while
setting the microphone level, or very loud feedback will occur! Damage to the system is likely if this occurs!
DO NOT connect the inputs of the SP® 118P Sub to the output of a power amplifier. The inputs are meant to
be driven from a line-level strength signal.
DO NOT remove the protective metal grille.
WARNING! The SP® 118P Sub is very efficient and powerful! This sound system can permanently damage
hearing! Use extreme care setting the overall maximum loudness!
The apparent sound level of the SP® 118P Sub can be deceiving due to its clear, clean sound output. The lack of
distortion or obvious distress can make the sound level seem much lower than it actually is. This system is capa-
ble of SPL in excess of 128 dB at 1 M from the speaker!
Transporting the SP® 118P Sub
Two four-way inset handles allow the SP® 118P Sub to be picked up and transported. Four large rubber feet on
the bottom provide for a buzz free foundation for the Sub sitting on a wooden or tile floor.
Connecting AC Power To The SP® 118P Sub
The SP® 118P Sub comes with an 6-foot IEC connection AC power cord. If you are using an extension cord or
power strip with this powered speaker, make sure it is of good quality and of a sufficient current capacity to
maintain safety and maximize the power output capability of the SP® 118P Sub. For maximum undistorted out-
put, do not connect any other device to the same extension cord that the SP® 118P Sub is connected to. Do not
exceed the rated current capacity of the extension cord with the sum total of all units connected to it.
Advertisement
