Download Print this page
Peavey SP 5 Specifications

Peavey SP 5 Specifications

Two-way speaker system

Advertisement

Quick Links

SPECIFICATIONS

Frequency response, 1 meter on-axis,
swept-sine in anechoic environment:
69 Hz to 17 kHz
Usable low frequency limit
(-10 dB point):
50 Hz
Power handling:
Full range:
400 Watts continuous
800 Watts program
1,600 Watts peak
Sound pressure level, 1 Watt,
1 meter in anechoic environment:
Full range:
99.0 dB SPL (2.83 V input)
Maximum sound pressure level
(1 meter):
Full range:
125 dB SPL continuous
131 dB SPL peak
Radiation angle measured at
-6 dB point of polar response:
90° horizontal by 40° vertical
The vertical main polar lobe is
angled down 10° with respect to
straight ahead being +10, -30°
SP
5
Transducer complement:
Low frequency section:
1x 15" SP-15825 Scorpion
®
Plus HO Woofer
High frequency section:
1x .875" exit /51mm voice coil
RX™ 22 compression driver on an
asymmetrical Quadratic Throat
CD horn
Box tuning frequency:
Low Frequency Section: 54 Hz
Crossover frequency
(internal passive):
Low Frequency – High Frequency
1,800 Hz
Impedance (Z):
Full Range:
Nominal:
8.0 Ω
Minimum:
5.9 Ω
Input connections:
Full Range: two 1/4" phone jacks
and one Neutrik
®
four-pin
Speakon
jack
®
Enclosure materials and finish:
Nine-ply Baltic birch plywood
finished in black carpet
Mounting provisions:
This unit is not designed for
overhead suspension
Built-in SA-1 stand-mount adapter
incorporated and four large rubber
feet on bottom for
floor use
Dimensions (H x W x D):
Front:
27.63" x 20.56" x 16.5"
702 mm x 522 mm x 419 mm
Rear:
27.63" x 14.8" x 16.5"
702 mm x 378 mm x 419 mm
Net Weight:
56 lbs. (25.5kg)
Features
• Two-way, full-range sound
reinforcement system
• 15" Scorpion Plus HO woofer
with field-replaceable basket
• Rx22 compression driver with
ferrofluid cooling
• Patented Quadratic Throat
Waveguide
technology
• Asymmetrical horn aims the
sound down 10˚ (at the
audience, not over their heads)
• 800 Watts program, 1600
Watts peak
• Sound Guard
III tweeter
protection
• Full-range inputs include
a Neutrik Speakon four-pin jack
and two 1/4" phone jacks
• Trapezoidal Baltic birch
enclosure, 25% lighter
than SP 5X
• Stand-mount adapter

Advertisement

loading

Summary of Contents for Peavey SP 5

  • Page 1: Specifications

    SPECIFICATIONS Frequency response, 1 meter on-axis, swept-sine in anechoic environment: 69 Hz to 17 kHz Usable low frequency limit (-10 dB point): 50 Hz Power handling: Full range: 400 Watts continuous 800 Watts program 1,600 Watts peak Sound pressure level, 1 Watt, 1 meter in anechoic environment: Full range: 99.0 dB SPL (2.83 V input)
  • Page 2 Description The new SP 5 features the Peavey Quadratic Throat Waveguide ™ an enclosure made from Baltic birch plywood. The SP 5 is a two- way speaker system comprised of a high output 15” Scorpion Plus HO ® woofer with a Kevlar -impregnated ®...
  • Page 3 The frequency response of the SP 5 is measured at a distance of 1 meter using a 1 Watt (into the nominal impedance) swept-sine input signal. As shown in figure...
  • Page 4 SPECIFICATIONS ™ 80304985 Features and specifications subject to change without notice. Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • www.peavey.com ©2004 Printed in the U.S.A. 03/04...